Maxshield Coveralls
Maxshield Disposable Coveralls with Non Elastic Cuffs
Maxshield Disposable Coveralls With Non-Elastic Cuffs
| Size | Part # (Click to Order) |
Maxshield™ Price (Click to Order) |
Small |
||
Medium |
||
Large |
||
XL |
||
XXL |
||
3XL |
||
4XL |
||
5XL |
||
| Each Case contains 25 Garments | ||
Maxshield Disposable Coveralls with Elastic Cuffs
Maxshield Disposable Coveralls with Elastic Cuffs
| Size | Part # (Click to Order) |
Maxshield™ Price (Click to Order) |
Small |
||
Medium |
||
Large |
||
XL |
||
2XL |
||
3XL |
||
4XL |
||
5XL |
||
| Each Case contains 25 Garments | ||
Maxshield Disposable Coveralls with Hood with Elastic
Maxshield Disposable Coveralls With Hood with Elastic
| Size | Part # (Click to Order) |
Maxshield™ Price (Click to Order) |
Small |
||
Medium |
||
Large |
||
XL |
||
2XL |
||
3XL |
||
4XL |
||
5XL |
||
| Each Case contains 25 Garments | ||
Maxshield Disposable Coveralls with Hood & Boots with Elastic
Maxshield Disposable Coveralls with Hood & Boots with Elastic
| Size | Part # (Click to Order) |
Maxshield™ Price (Click to Order) |
Small |
||
Medium |
||
Large |
||
XL |
||
2XL |
||
3XL |
||
4XL |
||
5XL |
||
| Each Case contains 25 Garments | ||
Maxshield™ Specifications VS Tyvek®
| Test | Test Method | Discription | MaxShield | Tyvek |
| Weight | ASTM D 3776 option C | Weight in ounces per square yard | 1.7 oz/sq. yd | 1.378 oz/sq. yd |
| Thickness | ASTM D1777 | Measures the thickness of the fabric from the inside surface to the outside surface. | .054 inches | .007 inches |
| Tensile Strength – Strip Method | ASTM D 5035 | Determines the breaking force required to tear a strip of fabric by grabbing and pulling in each direction. | Length 6.75 lbs
Width 8.86 lbs |
Length 7.9 lbs
Width 7.1 lbs |
| longation % | ASTM D 5035 | Determines by percent the degree to witch a fabric will stretch before braking by grabbing and pulling in each direction. | Length 62.45 %
Width 59.32 % |
|
| Tongue Tear | ASTM D 2261 | This test measures the capacity of a fabric to withstand the tearing force to propagate a single tear after its initiation. Origin of tear is initiated prior to testing. Results measure the force required to maintain a constant rate of tear in each direction after the initial tear. | Length 5.85 lbs
Width 5.35 lbs |
Length 3.1 lbs
Width 3.3 lbs |
| Bursting Strength | ASTM D 3786 | Measures the force required, applied at right angles, at which point the fabric will burst | 92.5 lbs | 60 lbs |
| Water Resistance-
Suter Hydrostatic Pressure Tester, Option 1, 10 mm/sec. |
AATCC 127 | Evaluate barrier effectiveness against liquids. Measure the | 157.7 cm of water | |
| Air Permeability | ASTM D 737 | Measures the air permeability of the fabric. The rate of air flow is adjusted to obtain a prescribed air pressure differential between the to fabric surfaces. | <.130 cubic feet per min of air /sq. ft | |
| Moisture Vapor Transmission
(Test conditions were 73.4oF + 2oF and 50% RH + 2% RH) |
ASTM E 96, Method B | Measures the time rate of water vapor transmission through a unit area of fabric. | 453.6 (g/m2/24 hours) | 580 (g/m2/24 hours) |
| Flamability | CFR-1610 | Class 1 means when time of flame spread is 4 seconds or more | Class 1 | Class 1 |